This process will provide a install of the latest FFmpeg tools and libraries including several external encoding and decoding libraries (codecs) for supported releases of Ubuntu, Debian, and Linux Mint .

Installation of the Dependencies

sudo apt-get update
sudo apt-get -y install autoconf automake build-essential libass-dev libfreetype6-dev \
  libsdl1.2-dev libtheora-dev libtool libva-dev libvdpau-dev libvorbis-dev libxcb1-dev libxcb-shm0-dev \
  libxcb-xfixes0-dev pkg-config texinfo zlib1g-dev

Note: Server users can omit the ffplay and x11grab dependencies: libsdl1.2-dev libva-dev libvdpau-dev libxcb1-dev libxcb-shm0-dev libxcb-xfixes0-dev.

Now make a directory for the source files that will be downloaded later in this guide:

mkdir ~/ffmpeg_sources

Compilation & Installation

You can compile ffmpeg to your liking. If you do not require certain encoders you may skip the relevant section and then remove the appropriate ./configure option in FFmpeg. For example, if libopus is not needed, then skip that section and then remove --enable-libopus from the Install FFmpeg section.

This guide is designed to be non-intrusive and will create several directories in your home directory:

  • ffmpeg_sources – Where the source files will be downloaded.
  • ffmpeg_build – Where the files will be built and libraries installed.
  • bin – Where the resulting binaries (ffmpeg, ffplay, ffserver, x264, and yasm) will be installed.

Yasm

An assembler for x86 optimizations used by x264 and FFmpeg. Highly recommended or your resulting build may be very slow.

If your repository offers a yasm package ≥ 1.2.0 then you can install that instead of compiling:

sudo apt-get install yasm

Otherwise you can compile:

cd ~/ffmpeg_sources
wget http://www.tortall.net/projects/yasm/releases/yasm-1.3.0.tar.gz
tar xzvf yasm-1.3.0.tar.gz
cd yasm-1.3.0
./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin"
make
make install
make distclean

libx264

Requires ffmpeg to be configured with --enable-gpl--enable-libx264.

If your repository offers a libx264-dev package ≥ 0.118 then you can install that instead of compiling:

sudo apt-get install libx264-dev

Otherwise you can compile:

cd ~/ffmpeg_sources
wget http://download.videolan.org/pub/x264/snapshots/last_x264.tar.bz2
tar xjvf last_x264.tar.bz2
cd x264-snapshot*
PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --bindir="$HOME/bin" --enable-static
PATH="$HOME/bin:$PATH" make
make install
make distclean

libx265

sudo apt-get install cmake mercurial
cd ~/ffmpeg_sources
hg clone https://bitbucket.org/multicoreware/x265
cd ~/ffmpeg_sources/x265/build/linux
PATH="$HOME/bin:$PATH" cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX="$HOME/ffmpeg_build" -DENABLE_SHARED:bool=off ../../source
make
make install
make distclean

libfdk-aac

Requires ffmpeg to be configured with --enable-libfdk-aac (and --enable-nonfree if you also included --enable-gpl).

cd ~/ffmpeg_sources
wget -O fdk-aac.tar.gz https://github.com/mstorsjo/fdk-aac/tarball/master
tar xzvf fdk-aac.tar.gz
cd mstorsjo-fdk-aac*
autoreconf -fiv
./configure --prefix="$HOME/ffmpeg_build" --disable-shared
make
make install
make distclean

libmp3lame

Requires ffmpeg to be configured with --enable-libmp3lame.

If your repository offers a libmp3lame-dev package ≥ 3.98.3 then you can install that instead of compiling:

sudo apt-get install libmp3lame-dev

Otherwise you can compile:

sudo apt-get install nasm
cd ~/ffmpeg_sources
wget http://downloads.sourceforge.net/project/lame/lame/3.99/lame-3.99.5.tar.gz
tar xzvf lame-3.99.5.tar.gz
cd lame-3.99.5
./configure --prefix="$HOME/ffmpeg_build" --enable-nasm --disable-shared
make
make install
make distclean

libopus

Requires ffmpeg to be configured with --enable-libopus.

If your repository offers a libopus-dev package ≥ 1.1 then you can install that instead of compiling:

sudo apt-get install libopus-dev

Otherwise you can compile:

cd ~/ffmpeg_sources
wget http://downloads.xiph.org/releases/opus/opus-1.1.tar.gz
tar xzvf opus-1.1.tar.gz
cd opus-1.1
./configure --prefix="$HOME/ffmpeg_build" --disable-shared
make
make install
make clean

libvpx

Requires ffmpeg to be configured with --enable-libvpx.

cd ~/ffmpeg_sources
wget http://storage.googleapis.com/downloads.webmproject.org/releases/webm/libvpx-1.5.0.tar.bz2
tar xjvf libvpx-1.5.0.tar.bz2
cd libvpx-1.5.0
PATH="$HOME/bin:$PATH" ./configure --prefix="$HOME/ffmpeg_build" --disable-examples --disable-unit-tests
PATH="$HOME/bin:$PATH" make
make install
make clean

ffmpeg

sudo add-apt-repository ppa:kirillshkrogalev/ffmpeg-next
sudo apt-get update
sudo apt-get install ffmpeg

Otherwise you can compile:

cd ~/ffmpeg_sources
wget http://ffmpeg.org/releases/ffmpeg-snapshot.tar.bz2
tar xjvf ffmpeg-snapshot.tar.bz2
cd ffmpeg
PATH="$HOME/bin:$PATH" PKG_CONFIG_PATH="$HOME/ffmpeg_build/lib/pkgconfig" ./configure \
  --prefix="$HOME/ffmpeg_build" \
  --pkg-config-flags="--static" \
  --extra-cflags="-I$HOME/ffmpeg_build/include" \
  --extra-ldflags="-L$HOME/ffmpeg_build/lib" \
  --bindir="$HOME/bin" \
  --enable-gpl \
  --enable-libass \
  --enable-libfdk-aac \
  --enable-libfreetype \
  --enable-libmp3lame \
  --enable-libopus \
  --enable-libtheora \
  --enable-libvorbis \
  --enable-libvpx \
  --enable-libx264 \
  --enable-libx265 \
  --enable-nonfree
PATH="$HOME/bin:$PATH" make
make install
make distclean
hash -r

Conclusion

Installation is now complete and ffmpeg is now ready for use. Your newly compiled FFmpeg programs are in ~/bin.

Usage

There are several methods to use your new ffmpeg.

  • Navigate to ~/bin and execute the binary: cd ~/bin && ./ffmpeg -i ~/input.mp4 ~/videos/output.mkv (notice the ./)
  • Or use the full path to the binary: /home/yourusername/bin/ffmpeg -i ../input.mp4 ../videos/output.mkv

If you want the ffmpeg command to just work from anywhere:

  • Log in and log out
  • Or run source ~/.profile

Note:~/bin is included in the standard Ubuntu $PATH by default (via the ~/.profile file), but only when the ~/bin directory actually exists. This is why you must log out then log in or run source ~/.profile if you just created ~/bin. See Ubuntu Wiki: Persistent Environment Variables for more info.

Documentation

If you want to run man ffmpeg to have local access to the documentation:

echo "MANPATH_MAP $HOME/bin $HOME/ffmpeg_build/share/man" >> ~/.manpath

You may then have to log out and then log in for man ffmpeg to work.

HTML formatted documentation is available in ~/ffmpeg_build/share/doc/ffmpeg.

You can also refer to the online FFmpeg documentation, but remember that it is regenerated daily and is meant to be used with the most current ffmpeg (meaning an old build may not be compatible with the online docs).

Updating FFmpeg

Development of FFmpeg is active and an occasional update can give you new features and bug fixes. First you need to delete (or move) the old files:

rm -rf ~/ffmpeg_build ~/ffmpeg_sources ~/bin/{ffmpeg,ffprobe,ffplay,ffserver,vsyasm,x264,x265,yasm,ytasm}

Now just follow the guide from the beginning.

 

Comments


This process will provide a install of the latest FFmpeg tools and libraries including several external encoding and decoding...

Read Post

This process will provide a install of the latest FFmpeg tools and libraries including several external encoding and decoding...

Read Post

Leave a Reply

Your email address will not be published. Required fields are marked *